OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-02665-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #21 SMP Thu Feb 1 08:49:48 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x00000000ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x00000000ffffffff] Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 516615 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Sorting __ex_table... Memory: 2054964K/2095104K available (5390K kernel code, 336K rwdata, 1472K rodata, 192K init, 848K bss, 40140K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,plic0,c000000: mapped 10 interrupts to 1/2 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0xee/0x28e with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=19 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-02665-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #21 SMP Thu Feb 1 08:49:48 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x00000000ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x00000000ffffffff] Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 516615 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Sorting __ex_table... Memory: 2054964K/2095104K available (5390K kernel code, 336K rwdata, 1472K rodata, 192K init, 848K bss, 40140K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,plic0,c000000: mapped 10 interrupts to 1/2 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0xee/0x28e with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=19 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 192K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 14 15:42:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder EXT4-fs (vdb): mounting ext2 file system using the ext4 subsystem EXT4-fs (vdb): mounted filesystem without journal. Opts: (null) + set -e + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/autoconf-2.69-26.fc28.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nodeps --nocheck Installing /var/tmp/autoconf-2.69-26.fc28.src.rpm warning: user mockbuild does not exist - using root warning: group mock does not exist - using root warning: user mockbuild does not exist - using root warning: group mock does not exist - using root warning: user mockbuild does not exist - using root warning: group mock does not exist - using root warning: user mockbuild does not exist - using root warning: group mock does not exist - using root warning: user mockbuild does not exist - using root warning: group mock does not exist - using root Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Zqwd2X + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf autoconf-2.69 + /usr/bin/xz -dc /rpmbuild/SOURCES/autoconf-2.69.tar.xz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd autoconf-2.69 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/cat /rpmbuild/SOURCES/autoconf-2.69-perl-5.22-autoscan.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.rgD4n5 + umask 022 + cd /rpmbuild/BUILD + cd autoconf-2.69 + export EMACS=/usr/bin/emacs + EMACS=/usr/bin/emacs + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro ' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./build-aux/config.guess ++ basename ./build-aux/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./build-aux/config.guess '/usr/lib/rpm/redhat/config.guess' -> './build-aux/config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./build-aux/config.sub ++ basename ./build-aux/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./build-aux/config.sub '/usr/lib/rpm/redhat/config.sub' -> './build-aux/config.sub' + '[' 0 = 1 ']' + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-lispdir=/usr/share/emacs/site-lisp/autoconf configure: WARNING: unrecognized options: --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu configure: autobuild project... GNU Autoconf configure: autobuild revision... 2.69 configure: autobuild hostname... stage4-builder configure: autobuild timestamp... 20180214T154213Z checking whether /bin/sh -n is known to work... yes checking for characters that cannot appear in file names... none checking whether directories can have trailing spaces... yes checking for expr... /usr/bin/expr checking for GNU M4 that supports accurate traces... /usr/bin/m4 checking whether /usr/bin/m4 accepts --gnu... yes checking how m4 supports trace files... --debugfile checking for perl... /usr/bin/perl checking whether /usr/bin/perl Fcntl::flock is implemented... yes checking for emacs... /usr/bin/emacs checking whether /usr/bin/emacs is sufficiently recent... no checking for emacs... no checking where .elc files should go... /usr/share/emacs/site-lisp/autoconf checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a sed that does not truncate output... /usr/bin/sed checking whether make is case sensitive... yes configure: creating ./config.status config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating man/Makefile config.status: creating lib/emacs/Makefile config.status: creating Makefile config.status: creating doc/Makefile config.status: creating lib/Makefile config.status: creating lib/Autom4te/Makefile config.status: creating lib/autoscan/Makefile config.status: creating lib/m4sugar/Makefile config.status: creating lib/autoconf/Makefile config.status: creating lib/autotest/Makefile config.status: creating bin/Makefile config.status: executing tests/atconfig commands configure: WARNING: unrecognized options: --disable-dependency-tracking + make make all-recursive make[1]: Entering directory '/rpmbuild/BUILD/autoconf-2.69' Making all in bin make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/bin' rm -f autom4te autom4te.tmp srcdir=''; \ test -f ./autom4te.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autom4te.in; do not edit by hand.|g' ${srcdir}autom4te.in >autom4te.tmp chmod +x autom4te.tmp chmod a-w autom4te.tmp mv autom4te.tmp autom4te cd ../lib && make autom4te.cfg make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib' rm -f autom4te.cfg autom4te.tmp sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@AWK[@]|gawk|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' ./autom4te.in >autom4te.tmp chmod a-w autom4te.tmp mv autom4te.tmp autom4te.cfg make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib' cd ../lib/m4sugar && make version.m4 make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' :;{ \ echo '# This file is part of -*- Autoconf -*-.' && \ echo '# Version of Autoconf.' && \ echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \ echo '# Free Software Foundation, Inc.' && \ echo &&\ echo 'm4_define([m4_PACKAGE_NAME], [GNU Autoconf])' && \ echo 'm4_define([m4_PACKAGE_TARNAME], [autoconf])' && \ echo 'm4_define([m4_PACKAGE_VERSION], [2.69])' && \ echo 'm4_define([m4_PACKAGE_STRING], [GNU Autoconf 2.69])' && \ echo 'm4_define([m4_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \ echo 'm4_define([m4_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])' && \ echo 'm4_define([m4_PACKAGE_YEAR], ['`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../../ChangeLog`'])'; \ } > version.m4-t mv version.m4-t version.m4 make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language M4sh --cache '' --melt ./autoconf.as -o autoconf.in rm -f autoconf autoconf.tmp srcdir=''; \ test -f ./autoconf.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoconf.in; do not edit by hand.|g' ${srcdir}autoconf.in >autoconf.tmp chmod +x autoconf.tmp chmod a-w autoconf.tmp mv autoconf.tmp autoconf rm -f autoheader autoheader.tmp srcdir=''; \ test -f ./autoheader.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoheader.in; do not edit by hand.|g' ${srcdir}autoheader.in >autoheader.tmp chmod +x autoheader.tmp chmod a-w autoheader.tmp mv autoheader.tmp autoheader rm -f autoreconf autoreconf.tmp srcdir=''; \ test -f ./autoreconf.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoreconf.in; do not edit by hand.|g' ${srcdir}autoreconf.in >autoreconf.tmp chmod +x autoreconf.tmp chmod a-w autoreconf.tmp mv autoreconf.tmp autoreconf rm -f ifnames ifnames.tmp srcdir=''; \ test -f ./ifnames.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from ifnames.in; do not edit by hand.|g' ${srcdir}ifnames.in >ifnames.tmp chmod +x ifnames.tmp chmod a-w ifnames.tmp mv ifnames.tmp ifnames rm -f autoscan autoscan.tmp srcdir=''; \ test -f ./autoscan.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoscan.in; do not edit by hand.|g' ${srcdir}autoscan.in >autoscan.tmp chmod +x autoscan.tmp chmod a-w autoscan.tmp mv autoscan.tmp autoscan rm -f autoupdate autoupdate.tmp srcdir=''; \ test -f ./autoupdate.in || srcdir=./; \ sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoupdate.in; do not edit by hand.|g' ${srcdir}autoupdate.in >autoupdate.tmp chmod +x autoupdate.tmp chmod a-w autoupdate.tmp mv autoupdate.tmp autoupdate make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/bin' Making all in . make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69' Making all in lib make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib' Making all in Autom4te make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te' Making all in m4sugar make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ --language=m4sugar \ --freeze \ --output=m4sugar.m4f autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ --language=m4sh \ --freeze \ --output=m4sh.m4f make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' Making all in autoconf make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf' autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ --language=autoconf \ --freeze \ --output=autoconf.m4f make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf' Making all in autotest make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest' autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ --language=autotest \ --freeze \ --output=autotest.m4f make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest' Making all in autoscan make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan' echo '# Automatically Generated: do not edit this file' >autoscan.list sed '/^[#]/!q' ./autoscan.pre >>autoscan.list ( \ sed -n '/^[^#]/p' ./autoscan.pre; \ autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib --cache '' -M -l autoconf -t'AN_OUTPUT:$1: $2 $3' \ ) | LC_ALL=C sort >>autoscan.list make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan' Making all in emacs make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs' WARNING: Warnings can be ignored. :-) if test "no" != no; then \ set x; \ list='autoconf-mode.el autotest-mode.el'; for p in $list; do \ if test -f "$p"; then d=; else d="./"; fi; \ set x "$@" "$d$p"; shift; \ done; \ shift; \ EMACS="no" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \ else : ; fi make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib' Making all in doc make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/doc' Making all in tests make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/tests' autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=M4sh ./wrapper.as -o wrapper.in rm -f autoconf autoconf.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoconf.tmp chmod +x autoconf.tmp chmod a-w autoconf.tmp mv -f autoconf.tmp autoconf rm -f autoheader autoheader.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoheader.tmp chmod +x autoheader.tmp chmod a-w autoheader.tmp mv -f autoheader.tmp autoheader rm -f autom4te autom4te.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autom4te.tmp chmod +x autom4te.tmp chmod a-w autom4te.tmp mv -f autom4te.tmp autom4te rm -f autoreconf autoreconf.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoreconf.tmp chmod +x autoreconf.tmp chmod a-w autoreconf.tmp mv -f autoreconf.tmp autoreconf rm -f autoscan autoscan.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoscan.tmp chmod +x autoscan.tmp chmod a-w autoscan.tmp mv -f autoscan.tmp autoscan rm -f autoupdate autoupdate.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoupdate.tmp chmod +x autoupdate.tmp chmod a-w autoupdate.tmp mv -f autoupdate.tmp autoupdate rm -f ifnames ifnames.tmp input=wrapper.in; \ sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >ifnames.tmp chmod +x ifnames.tmp chmod a-w ifnames.tmp mv -f ifnames.tmp ifnames make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/tests' Making all in man make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/man' Updating man page autoscan.1 PATH="../tests:../build-aux:$PATH"; \ export PATH; \ /bin/sh /rpmbuild/BUILD/autoconf-2.69/build-aux/missing --run help2man \ --include=autoscan.x \ --include=./common.x \ --source='GNU Autoconf 2.69' \ --output=autoscan.1.t `echo 'autoscan' | sed 's,.*/,,'` if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoscan.1 >autoscan.1a.t 2>/dev/null && \ sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoscan.1.t | cmp autoscan.1a.t - >/dev/null 2>&1; then \ touch autoscan.1; \ else \ mv autoscan.1.t autoscan.1; \ fi rm -f autoscan.1*.t Updating man page config.guess.1 PATH="../tests:../build-aux:$PATH"; \ export PATH; \ /bin/sh /rpmbuild/BUILD/autoconf-2.69/build-aux/missing --run help2man \ --include=config.guess.x \ --include=./common.x \ --source='GNU Autoconf 2.69' \ --output=config.guess.1.t `echo 'config.guess' | sed 's,.*/,,'` if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1 >config.guess.1a.t 2>/dev/null && \ sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1.t | cmp config.guess.1a.t - >/dev/null 2>&1; then \ touch config.guess.1; \ else \ mv config.guess.1.t config.guess.1; \ fi rm -f config.guess.1*.t Updating man page config.sub.1 PATH="../tests:../build-aux:$PATH"; \ export PATH; \ /bin/sh /rpmbuild/BUILD/autoconf-2.69/build-aux/missing --run help2man \ --include=config.sub.x \ --include=./common.x \ --source='GNU Autoconf 2.69' \ --output=config.sub.1.t `echo 'config.sub' | sed 's,.*/,,'` if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1 >config.sub.1a.t 2>/dev/null && \ sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1.t | cmp config.sub.1a.t - >/dev/null 2>&1; then \ touch config.sub.1; \ else \ mv config.sub.1.t config.sub.1; \ fi rm -f config.sub.1*.t make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/man' make[1]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Oyxq1a + umask 022 + cd /rpmbuild/BUILD + '[' /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 '!=' / ']' + rm -rf /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 ++ dirname /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 + mkdir -p /rpmbuild/BUILDROOT + mkdir /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 + cd autoconf-2.69 + make install DESTDIR=/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 make install-recursive make[1]: Entering directory '/rpmbuild/BUILD/autoconf-2.69' Making install in bin make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/bin' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/bin' test -z "/usr/bin" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/bin" /usr/bin/install -c autom4te autoconf autoheader autoreconf ifnames autoscan autoupdate '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/bin' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/bin' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/bin' Making install in . make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69' make[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf" /usr/bin/install -c -m 644 ./INSTALL '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69' Making install in lib make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib' Making install in Autom4te make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf/Autom4te" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/Autom4te" /usr/bin/install -c -m 644 C4che.pm ChannelDefs.pm Channels.pm Configure_ac.pm FileUtils.pm General.pm Getopt.pm Request.pm XFile.pm '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/Autom4te' make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te' Making install in m4sugar make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf/m4sugar" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar" /usr/bin/install -c -m 644 m4sugar.m4 foreach.m4 m4sh.m4 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar' test -z "/usr/share/autoconf/m4sugar" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar" /usr/bin/install -c -m 644 version.m4 m4sugar.m4f m4sh.m4f '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar' make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar' Making install in autoconf make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf" /usr/bin/install -c -m 644 autoconf.m4 general.m4 status.m4 oldnames.m4 specific.m4 autoheader.m4 autoupdate.m4 autotest.m4 autoscan.m4 lang.m4 c.m4 erlang.m4 fortran.m4 functions.m4 go.m4 headers.m4 types.m4 libs.m4 programs.m4 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf' test -z "/usr/share/autoconf/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf" /usr/bin/install -c -m 644 autoconf.m4f '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf' make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf' Making install in autotest make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf/autotest" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest" /usr/bin/install -c -m 644 autotest.m4 general.m4 specific.m4 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest' test -z "/usr/share/autoconf/autotest" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest" /usr/bin/install -c -m 644 autotest.m4f '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest' make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest' Making install in autoscan make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf/autoscan" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoscan" /usr/bin/install -c -m 644 autoscan.list '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoscan' make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan' Making install in emacs make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib' make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf" /usr/bin/install -c -m 644 autom4te.cfg '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf' make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib' Making install in doc make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/doc' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/doc' make[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/info" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info" /usr/bin/install -c -m 644 ./autoconf.info ./standards.info '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info' install-info --info-dir='/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info' '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info/autoconf.info' install-info --info-dir='/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info' '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info/standards.info' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/doc' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/doc' Making install in tests make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/tests' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/tests' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/tests' Making install in man make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/man' make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/man' make[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/man/man1" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/man/man1" /usr/bin/install -c -m 644 ./autoconf.1 ./autoheader.1 ./autom4te.1 ./autoreconf.1 ./autoscan.1 ./autoupdate.1 ./ifnames.1 ./config.guess.1 ./config.sub.1 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/man/man1' make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/man' make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/man' make[1]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69' + mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/share + install -m 0644 /rpmbuild/SOURCES/config.site /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share + mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/emacs/site-lisp/site-start.d + install -p -m 0644 /rpmbuild/SOURCES/autoconf-init.el /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/emacs/site-lisp/site-start.d + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-java-repack-jars Processing files: autoconf-2.69-26.fc27.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Zujn0u + umask 022 + cd /rpmbuild/BUILD + cd autoconf-2.69 + DOCDIR=/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + cp -pr AUTHORS /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + cp -pr ChangeLog /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + cp -pr NEWS /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + cp -pr README /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + cp -pr THANKS /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + cp -pr TODO /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.YO8Dqk + umask 022 + cd /rpmbuild/BUILD + cd autoconf-2.69 + LICENSEDIR=/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/licenses/autoconf + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/licenses/autoconf + cp -pr COPYING COPYING.EXCEPTION COPYINGv3 /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/licenses/autoconf + exit 0 Provides: autoconf = 2.69-26.fc27 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh /sbin/install-info Requires(preun): /bin/sh /sbin/install-info Requires: /bin/sh /usr/bin/perl Checking for unpackaged file(s): /usr/lib/rpm/check-files /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /rpmbuild/RPMS/noarch/autoconf-2.69-26.fc27.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MgIyRf + umask 022 + cd /rpmbuild/BUILD + cd autoconf-2.69 + /usr/bin/rm -rf /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.pc2TMh + umask 022 + cd /rpmbuild/BUILD + rm -rf autoconf-2.69 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off