[ 0.0] Examining the guest ... [ 18.1] Setting a random seed [ 18.1] Installing firstboot script: /mnt/tmp/riscv64/tmp/ctorrent.1Fk8qZ/ctorrent-boot.sh [ 18.1] Copying: /mnt/tmp/riscv64/tmp/ctorrent.1Fk8qZ/ctorrent-1.3.4-27.dnh3.3.2.fc27.src.rpm to /var/tmp [ 18.2] Copying: /mnt/tmp/riscv64/tmp/ctorrent.1Fk8qZ/local.repo to /etc/yum.repos.d/ [ 18.3] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded virtio_blk virtio0: [vda] 41943040 512-byte logical blocks (21.5 GB/20.0 GiB) libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Reached target Slices. [ OK ] Reached target Slices. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Swap. Starting Remount Root and Kernel File Systems... Mounting Temporary Directory (/tmp)... [ OK ] Listening on udev Kernel Socket. Starting Apply Kernel Variables... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-getty.slice. Starting udev Coldplug all Devices... EXT4-fs (vda): re-mounted. Opts: (null) [ OK ] Listening on Process Core Dump Socket. [ OK ] Created slice system-sshd\x2dkeygen.slice. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Paths. Starting Journal Service... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Apply Kernel Variables. Starting Configure read-only root support... Starting Rebuild Hardware Database... Starting Create System Users... systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Configure read-only root support. systemd-journald[87]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [* ] (1 of 3) A start job is running for…Hardware Database (24s / 1min 34s) [** ] (1 of 3) A start job is running for…Hardware Database (24s / 1min 34s) [*** ] (1 of 3) A start job is running for…Hardware Database (25s / 1min 34s) [ *** ] (2 of 3) A start job is running for…dplug all Devices (25s / no limit) [ *** ] (2 of 3) A start job is running for…dplug all Devices (26s / no limit) [ ***] (2 of 3) A start job is running for…dplug all Devices (26s / no limit) [ **] (3 of 3) A start job is running for dev-ttyS0.device (27s / 1min 31s) [ *] (3 of 3) A start job is running for dev-ttyS0.device (27s / 1min 31s) [ **] (3 of 3) A start job is running for dev-ttyS0.device (28s / 1min 31s) [ ***] (1 of 3) A start job is running for…Hardware Database (28s / 1min 34s) [ OK ] Started udev Coldplug all Devices. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Kernel Device Manager... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started dnf makecache timer. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting OpenSSH rsa Server Key Generation... Starting OpenSSH ecdsa Server Key Generation... [ OK ] Started D-Bus System Message Bus. Starting Login Service... Starting OpenSSH ed25519 Server Key Generation... Starting Network Service... [ *** ] (4 of 6) A start job is running for…er Key Generation (45s / no limit) [ OK ] Found device /dev/ttyS0. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Started Network Service. [ OK ] Started OpenSSH ed25519 Server Key Generation. [ *** ] (2 of 2) A start job is running for Login Service (58s / 2min 12s) [*** ] (1 of 2) A start job is running for…r Key Generation (1min / no limit) [** ] (1 of 2) A start job is running for…ey Generation (1min 1s / no limit) [* ] (1 of 2) A start job is running for…ey Generation (1min 3s / no limit) [ OK ] Started OpenSSH rsa Server Key Generation. [** ] A start job is running for Login Service (1min 10s / 2min 12s) [*** ] A start job is running for Login Service (1min 11s / 2min 12s) [ *** ] A start job is running for Login Service (1min 11s / 2min 12s) [ *** ] A start job is running for Login Service (1min 12s / 2min 12s) [ ***] A start job is running for Login Service (1min 12s / 2min 12s) [ **] A start job is running for Login Service (1min 13s / 2min 12s) [ *] A start job is running for Login Service (1min 14s / 2min 12s) [ **] A start job is running for Login Service (1min 14s / 2min 12s) [ ***] A start job is running for Login Service (1min 15s / 2min 12s) [ *** ] A start job is running for Login Service (1min 16s / 2min 12s) [ *** ] A start job is running for Login Service (1min 16s / 2min 12s) [*** ] A start job is running for Login Service (1min 17s / 2min 12s) [** ] A start job is running for Login Service (1min 17s / 2min 12s) [* ] A start job is running for Login Service (1min 18s / 2min 12s) [** ] A start job is running for Login Service (1min 19s / 2min 12s) [*** ] A start job is running for Login Service (1min 19s / 2min 12s) [ *** ] A start job is running for Login Service (1min 20s / 2min 12s) [ *** ] A start job is running for Login Service (1min 20s / 2min 12s) random: crng init done [ ***] A start job is running for Login Service (1min 21s / 2min 12s) [ **] A start job is running for Login Service (1min 21s / 2min 12s) [ *] A start job is running for Login Service (1min 22s / 2min 12s) [ **] A start job is running for Login Service (1min 23s / 2min 12s) [ ***] A start job is running for Login Service (1min 23s / 2min 12s) [ *** ] A start job is running for Login Service (1min 24s / 2min 12s) [ *** ] A start job is running for Login Service (1min 25s / 2min 12s) [*** ] A start job is running for Login Service (1min 25s / 2min 12s) [** ] A start job is running for Login Service (1min 26s / 2min 12s) [* ] A start job is running for Login Service (1min 26s / 2min 12s) [** ] A start job is running for Login Service (1min 27s / 2min 12s) [*** ] A start job is running for Login Service (1min 28s / 2min 12s) [ *** ] A start job is running for Login Service (1min 28s / 2min 12s) [ *** ] A start job is running for Login Service (1min 29s / 2min 12s) [ ***] A start job is running for Login Service (1min 30s / 2min 12s) [ **] A start job is running for Login Service (1min 30s / 2min 12s) [ *] A start job is running for Login Service (1min 31s / 2min 12s) [ **] A start job is running for Login Service (1min 31s / 2min 12s) [ ***] A start job is running for Login Service (1min 32s / 2min 12s) [ *** ] A start job is running for Login Service (1min 32s / 2min 12s) [ *** ] A start job is running for Login Service (1min 33s / 2min 12s) [*** ] A start job is running for Login Service (1min 34s / 2min 12s) [** ] A start job is running for Login Service (1min 34s / 2min 12s) [* ] A start job is running for Login Service (1min 35s / 2min 12s) [** ] A start job is running for Login Service (1min 35s / 2min 12s) [*** ] A start job is running for Login Service (1min 36s / 2min 12s) [ *** ] A start job is running for Login Service (1min 37s / 2min 12s) [ *** ] A start job is running for Login Service (1min 37s / 2min 12s) [ ***] A start job is running for Login Service (1min 38s / 2min 12s) [ **] A start job is running for Login Service (1min 38s / 2min 12s) [ *] A start job is running for Login Service (1min 39s / 2min 12s) [ **] A start job is running for Login Service (1min 40s / 2min 12s) [ ***] A start job is running for Login Service (1min 40s / 2min 12s) [ *** ] A start job is running for Login Service (1min 41s / 2min 12s) [ *** ] A start job is running for Login Service (1min 41s / 2min 12s) [*** ] A start job is running for Login Service (1min 42s / 2min 12s) [** ] A start job is running for Login Service (1min 42s / 2min 12s) [* ] A start job is running for Login Service (1min 43s / 2min 12s) [** ] A start job is running for Login Service (1min 44s / 2min 12s) [*** ] A start job is running for Login Service (1min 44s / 2min 12s) [ *** ] A start job is running for Login Service (1min 45s / 2min 12s) [ *** ] A start job is running for Login Service (1min 45s / 2min 12s) [ ***] A start job is running for Login Service (1min 46s / 2min 12s) [ **] A start job is running for Login Service (1min 47s / 2min 12s) [ *] A start job is running for Login Service (1min 47s / 2min 12s) [ **] A start job is running for Login Service (1min 48s / 2min 12s) [ ***] A start job is running for Login Service (1min 49s / 2min 12s) [ *** ] A start job is running for Login Service (1min 49s / 2min 12s) [ *** ] A start job is running for Login Service (1min 50s / 2min 12s) [*** ] A start job is running for Login Service (1min 50s / 2min 12s) [** ] A start job is running for Login Service (1min 51s / 2min 12s) [* ] A start job is running for Login Service (1min 51s / 2min 12s) [ OK ] Reached target Network. Starting libguestfs firstboot service... Starting Permit User Sessions... Starting Wait for Network to be Configured... [ OK ] Reached target sshd-keygen.target. firstboot.sh[151]: /usr/lib/virt-sysprep/firstboot.sh start Starting OpenSSH server daemon... [ OK ] Started Permit User Sessions. firstboot.sh[151]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Wait for Network to be Configured. [ OK ] Reached target Network is Online. [ OK ] Started Set the date and time. firstboot.sh[151]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-ctorrent-1Fk8qZ-ctorrent-boot-sh === firstboot.sh[151]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[151]: + set -e firstboot.sh[151]: + exec Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.16.0-rc2-00328-gebea62367bc4 on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: [FAILED] Failed to start Login Service. See 'systemctl status systemd-logind.service' for details. [ OK ] Stopped Login Service. Starting Login Service... [ OK ] Started Login Service. [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Created slice User Slice of mockbuild. Starting User Manager for UID 1000... [ OK ] Started Session c1 of user mockbuild. [ OK ] Started User Manager for UID 1000. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... Stopping User Manager for UID 1000... [ OK ] Stopped User Manager for UID 1000. [ OK ] Removed slice User Slice of mockbuild. [ OK ] Removed slice system-sshd\x2dkeygen.slice. [ OK ] Stopped target Timers. [ OK ] Stopped target Network is Online. [ OK ] Stopped Wait for Network to be Configured. [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... Stopping D-Bus System Message Bus... Stopping Login Service... Stopping Serial Getty on ttyS0... [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Login Service. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped libguestfs firstboot service. [ OK ] Stopped target Basic System. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped dnf makecache timer. [ OK ] Stopped target Paths. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target System Initialization. Stopping Load/Save Random Seed... [ OK ] Stopped Update is Completed. [ OK ] Stopped Rebuild Dynamic Linker Cache. [ OK ] Stopped Rebuild Hardware Database. [ OK ] Stopped Rebuild Journal Catalog. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped target Network. Stopping Network Service... [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Network Service. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Configure read-only root support. Unmounting Temporary Directory (/tmp)... [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped Apply Kernel Variables. [ OK ] Unmounted Temporary Directory (/tmp). [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Power-Off... systemd-shutdow: 21 output lines suppressed due to ratelimiting systemd-shutdown[1]: Syncing filesystems and block devices. systemd-shutdown[1]: Sending SIGTERM to remaining processes... systemd-journald[87]: Received SIGTERM from PID 1 (systemd-shutdow). systemd-shutdown[1]: Sending SIGKILL to remaining processes... systemd-shutdown[1]: Unmounting file systems. EXT4-fs (vda): re-mounted. Opts: data=ordered systemd-shutdown[1]: All filesystems unmounted. systemd-shutdown[1]: Deactivating swaps. systemd-shutdown[1]: All swaps deactivated. systemd-shutdown[1]: Detaching loop devices. systemd-shutdown[1]: All loop devices detached. systemd-shutdown[1]: Detaching DM devices. reboot: Power down Power off cp: cannot stat '/mnt/tmp/riscv64/tmp/ctorrent.1Fk8qZ/RPMS/noarch/*.noarch.rpm': No such file or directory